HIFI TRRS Balanced 2.5mm to 2 XLR 3Pin Male Audio Cable For Cayin N5 Iriver AK240 AK380 AK120 Amp Onkyo DP X1

HIFI TRRS Balanced 2.5mm to 2 XLR 3Pin Male Audio Cable For Cayin N5 Iriver AK240 AK380 AK120 Amp Onkyo DP X1
  • Продавецplayrf.us
  • Список ценUS $24.39piece
  • Продажная ценаUS $24.39piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,9 (984)

Oписание продукта


Singxer SDA-1 AK4118 DAC Amp DSD512 xCORE-200 USB2.0 PCM HDMI XMOS HiFi Audio Decoder Amplifier Digital-to-Analog Converter DAC

Please noted:

The SDA-1 can be configured with SW switches to accommodate different I2S standards.
However, as we know, HDMI-I2S is different for each manufacturer in the worldwide, and for most manufacturers HDMI-I2S is a proprietary proprietary protocol.

The SDA-1 can not accommodate to  all HDMI-I2S machines, so we don’t accept all the returns due to incompatible I2S interfaces problem.



The SDA-1 is a high-performance DAC that has been developed by our Singxer team for more than two years. It uses XMOS latest xCORE-200 series chip as the USB Audio program, the AKM third-generation flagship DAC as the main chip digital-analog conversion, AK4118 as a digital audio input receiver chip, the use of STM32 as the control core machine, Xilinx Large-scale FPGA as a clock system and digital audio stream processing. PCM up to 384Khz, DSD using native direct solution technology, up to DSD512.

Has a rich input and output interfaces, including standard USB2.0 input interface, SPDIF and BNC coaxial and AES balanced input, HDMI-I2S input interface, analog output XLR balanced output and RCA single-ended output; full interface supports DSD input.




Each input interface supports the sampling rate:
PCM: 44.1KHz, 48KHz, 88.2KHz, 96KHz,
176.4KHz, 192KHz, 352.8KHz, 384KHz
[Among them USB and I2S support all sampling rate, S / PDIF supports up to 192KHz]
DSD: 2.8 MHz (DSD64) - DoP, native
5.6 MHz (DSD128) - DoP, native
11.2 MHz (DSD256) - DoP, native
22.5792 MHz (DSD512) - native
[Among them USB and I2S support all DSD format, S / PDIF and AES / EBU support DSD64 DOP mode]
Bit width: up to 32 bit over USB and I2S
Up to 24 bit over S / PDIF



Main technical characteristics:

1. Independent research and development of adaptive clock system technology, built-in 4 independent ultra-low jitter audio crystal oscillator for the USB part of the configuration of the local clock system femtosecond level (customized version of CCHD-575);
2. High-performance digital-analog hybrid phase-locked loop, excellent clock synchronization recovery technology, can greatly filter the external digital input jitter secondary PLL;
3. Source synchronization technology and FPGA shaping technology, after the isolation of the I2S signal reshaping, thus eliminating the added chip caused by the jitter;
4. The original multi-input channel isolation technology to ensure the purity of each input signal.



Each interface electrical standard:

1, USB input socket for the standard USB-B-type female, USB power supply range 4.5V-5.1V;
2, SPDIF interface input standard S / PDIF signal, the input impedance of 75 ohms, AES input impedance of 110 ohms;
3, the power input is 115V / 230V AC, the internal use of TALEMA imported transformers for power supply;
4, I2S input is LVDS level in the form of HDMI interface, compatible with SU-1 interface;


Analog output performance:


Output level (0dBFS):
PCM: RCA single-ended output is 2V RMS, XLR balanced output is 4V RMS
DSD: RCA single-ended output is 1.34V RMS, XLR balanced output is 2.68V RMS
Output impedance: 22 ohms (RCA single ended) / 45 ohms (XLR balanced)
Frequency response: 20-20kHz +/- 0.1dB
Signal to noise ratio: 118dB
Distortion characteristics:
THD + N (1kHz, 0dBFS) 0.00042% at fs = 44.1Khz (PCM)
THD + N (1kHz, 0dBFS) 0.00029% at DSD128
Dynamic response (1kHz, -60dBFS) 118dB
Left and right channel separation> 120db

SDA-1 input multiple choice,5 digital inputs, so the input interface supports DSD.

System compatibility:

1, Windows 7, Windows 8, Windows 10; 32/64 bit, need to install special driver,please contact us
2, Native MacOS 10.6 and later, using the system comes with drivers
3, Native Linux with UAC2 compliant kernel, using the system comes with drivers (tested on Ubuntu and Daphile systems, based on INTEL X86 platform)
4, Android OS 4.2 and above, need equipment to support OTG function, Android 5.0 system is supported by default, the following recommendations for 5.0 with a dedicated player.

I2S interface with HDMI socket input:

1. Level of 3.3V LVDS differential signal;
2.I2S interface compatible with a number of I2S output signal definition, FPGA built-in PCM / DSD signal automatic identification algorithm;
3.DSD ON signal can also be self-defining, DSD ON this signal can be arbitrarily input to the PIN13,14,15,16 pin socket;
4.PIN1-3 and PIN7-9 phase adjustable, the user can configure the phase of these two pairs of outputs through a switch.




Dimensions and packaging:
Item size: 266MM * 220MM * 46MM, excluding the height of the machine feet and the rear of the amplifier connector prominent part.
Item weight about: 3KG.
Carton packaging size 330MM * 310MM * 110MM.
Carton weight about: 3.4KG
Accessories: a USB cable and a power cord.